Timken 6210-2RS – Timken Deep Groove Radial Ball Bearings – 50x90x20mm
This 6210-2RS bearing is a sealed miniature ball bearing with a Normal Radial Internal Clearance Greater. The bearing’s dimensions are 50x90x20mm
Inside Diameter (mm):
Outside Diameter (mm):
Seals or Shields:
Two Rubber Seals
Dynamic Load Rating (kN):
Static Load Rating (kN):
Reference Speed Rating (r/min):
Limiting Speed Rating (r/min):
Timken 6210-2RS Roller Bearing Description
Hrd Bearing Limited Company Can Not only Provideo Customer High Quality Timken 6210-2RS Bearings, But Also Best Service of Timken 6210-2RS Can Be Office. One Decade, We Export Timken 6210-2RS Bearing to Every Corner of the World. Always, we try the best to provide every customer high performance Timken 6210-2RS bearings. Contact us for more information of Timken 6210-2RS bearings. Email: [email protected]. We sure you will satisfied with our service of Timken 6210- 2RS bearings.
Timken 6210-2RS Roller Bearing Introduction
In 1899, TIMKEN group founder Mr. Timken Henry invented a taper Roller Bearings applied to axle field at that time, that is the tapered roller bearing, Timken 6210-2RS then the company was established.It has 52 factories and 81 sales offices , 9 technology and engineering center and 14 distribution and service center, spread all over the world in 29 countries and regions.
Timken 6210-2RS is a high quality bearing, alloy steel and relevant parts and accessories global leading manufacturers. No matter where in the world, as long as it has the equipment operation and power drive, you will see TIMKEN company’s technology and products. TIMKEN bearing production including two hundred and thirty types, twenty-six thousand different specifications of the tapered roller bearings, they are wide ly used all over the world.
Whether the family cars with a wheel components, the bearing of roller coaster, rail bearing the maintenance service, or the steel of plane engine shaft, all it will appear TIMKEN brand. Timken 6210-2RS products and services including: aviation parts, aircraft eng ine maintenance and overhaul, alloy steel bar and pipe material bearing parts and related parts, the condition monitoring system and service, encoder and sensor, engineering and technical service, lubricants and lubrication device, the helicopter rotor system and transmission components, precision steel parts, aviation , industry, and railway bearings, the repair and reconfigure of the housing , sealing products and training, etc.