SKF Bearing
NSK Bearing
FAG Bearing
TIMKEN Bearing
INA Bearing
NTN Bearing
KOYO Bearing
NACHI Bearing
Specifications
Series | |
Cone Part Number | |
Cup Part Number | |
Design Unit | |
Bearing Weight | |
Cage Material | |
Dimensions
d – Bore | |
D – Cup Outer Diameter | |
B – Cone Width | |
C – Cup Width | |
T – Bearing Width | |
Abutment and Fillet Dimensions
| R – Cone Backface “To Clear” Radius1 | |
| r – Cup Backface “To Clear” Radius2 | |
da – Cone Frontface Backing Diameter | |
db – Cone Backface Backing Diameter | |
Da – Cup Frontface Backing Diameter | |
Db – Cup Backface Backing Diameter | |
Ab – Cage-Cone Frontface Clearance | |
Aa – Cage-Cone Backface Clearance | |
| a – Effective Center Location3 | |
Basic Load Ratings
| C90 – Dynamic Radial Rating (90 million revolutions)4 | |
| C1 – Dynamic Radial Rating (1 million revolutions)5 | |
C0 – Static Radial Rating | |
| Ca90 – Dynamic Thrust Rating (90 million revolutions)6 | |
Factors
| K – Factor7 | |
| e – ISO Factor8 | |
| Y – ISO Factor9 | |
| Cg – Geometry Factor10 | |
- 1 These maximum fillet radii will be cleared by the bearing corners.
- 2 These maximum fillet radii will be cleared by the bearing corners.
- 3 Negative value indicates effective center inside cone backface.
- 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
- 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
- 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
- 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 10 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.
